Car seat belt buckle is you best choice to add some tough style to your car. This main purpose of this lovely seat belt buckle is to protect you from injured by accidental release. What´s more, you can control the tension of the shoulder strap. It means that you can move freely on your seat.

Features

• A set of two safety belt stoppers will decrease the press of the seat belt for driving in relax
• The seat belt buckle fits around the seat belt, and allows you to pull out some slack, so you can drive in comfort
• Safety car seat belt buckle will lock your seat belt to add safety and move freely at the same time
• Available to release the pressure from seat belt
• Easily to install, just through the safety seat belt buckle hole as you usually usage
• Available to clip and loosen easily by one-touch panel to adjust the length of seat belt

Package Includes

• 1 x Car Safety Buckle

Extra Info

• 1.Fully extend the whole of the seat belt to check for kinks.
• 2.Remove the bolt underneath the seat belt buckle. Hold the retractor straight and thread the seatbelt out. Remove the seat in the car if you need to gain a closer inspection of the belt.
• 3.Use the screwdriver to unscrew the current buckle from the car.
• 4.Screw in the new buckle. Then thread the seat belt through the new buckle.
• 5.Reinstall the small bar underneath the buckle to hold it in place.
• 6.Pull the seat belt out to make sure it´s working properly.
• 7.Reinstall the seat if necessary.